Evapco Cooling Tower Repair in Donna, TX
An Evapco cooling tower that is acting up rarely fixes itself. Call us for Evapco cooling tower repair in Donna, TX and a technician will diagnose it, quote the fix before starting and use parts matched to your model.
- Upfront quote before work
- 90-day parts & labor warranty
- Parts matched to your model
- Same-day service when available
Repairing Evapco Cooling Towers
Before ordering anything for an Evapco cooling tower, we look up the exact model number. Parts that look alike often differ between production runs, and matching the model avoids repeat visits.
How we repair your Evapco Cooling Tower
A cooling tower rejects heat from a chiller or process water loop by spraying warm water over fill media while fans pull air through, cooling the water by evaporation. A cooling tower typically includes a compressor, condenser and evaporator coils, fans, a capacitor and contactor, and a thermostat, or a water pump and pads on evaporative coolers. A technician checks airflow, electrical parts and refrigerant pressures, and inspects drains and coils.
Cooling failures in offices, server rooms and restaurants affect staff, equipment and customers, so commercial cooling calls are prioritized.
Evapco Cooling Tower repair at a glance
- Typical repair cost$300–$2,500
- Typical service life15–25 years
- Warranty on repairs90 days parts & labor
- QuoteUpfront, before work
- Same-day visitsWhen available
Common Evapco Cooling Tower problems we fix
What usually causes each symptom, and what our technician checks to confirm it.
Excessive drift or water spray
- Likely causes
- Missing or damaged drift eliminators, overflowing distribution basins, or high fan speed with clogged fill.
- What our technician checks
- Drift eliminators are inspected and the hot water distribution system is checked for overflow.
Water leaving the tower too warm
- Likely causes
- Clogged or scaled fill, uneven water distribution from plugged nozzles, a failed fan or drive, or high wet-bulb conditions.
- What our technician checks
- The technician measures range and approach, inspects nozzles and fill, and verifies fan speed and airflow.
Scale, algae or slime on fill
- Likely causes
- Poor water treatment, insufficient bleed-off, or a failed chemical feed pump.
- What our technician checks
- Water chemistry is tested, chemical feed equipment is checked, and fill condition is assessed for cleaning or replacement.
Basin heater or freeze problems
- Likely causes
- A failed basin heater or thermostat, a low water cutoff fault, or stagnant sections freezing in winter.
- What our technician checks
- Heater elements and controls are tested and low water cutoffs are verified before cold weather.
Basin overflowing or running dry
- Likely causes
- A stuck makeup water float valve, a failed level control, or excessive drift and bleed.
- What our technician checks
- The makeup valve and level controls are tested and bleed-off rates are verified.
Fan vibration or noise
- Likely causes
- Unbalanced or damaged fan blades, worn gearbox bearings, a misaligned drive shaft, or loose motor mounts.
- What our technician checks
- Vibration readings are taken, blade pitch and condition are inspected, and gearbox oil and alignment are checked.
Quick checks you can do safely
- Check that the tower fan is running when the chiller is loaded.
- Look at the basin water level and makeup valve.
- Note any unusual vibration, noise or water spray from the tower.
- Confirm the chemical treatment system has product and power.
- Clear leaves and debris from the basin screens.
Safety first: Cooling tower water can harbor Legionella bacteria, and fans and drives must be locked out before anyone enters the tower.
Still not working?
Call and describe what you see and hear, plus any error code. It helps the technician bring the right parts on the first visit.
(844) 442-1999Seeing a code? Try our error code lookup or troubleshooting wizard.
Our 5-step cooling tower repair process
- Call or book onlineTell us the appliance, brand and what it is doing. We confirm a visit window that works for you.
- DiagnosisThe technician inspects and tests the cooling tower to find the actual cause, not just the symptom.
- Upfront quoteYou get a clear price before any work starts. No surprise charges.
- RepairWe fix it with parts matched to your model, often on the same visit when the part is on the truck.
- Test and warrantyWe test the unit under normal operation, clean up and back the repair with a 90-day parts-and-labor warranty.
Evapco Cooling Tower repair cost and lifespan
National ballpark estimates. Your exact price depends on the part and labor, and you get it upfront after diagnosis. On the fence? Try the repair vs replace calculator.
Parts we replace most often
- Fill media
- Spray nozzles
- Drift eliminators
- Fan motor
- Gearbox or drive belt
- Makeup float valve
- Basin heater
We match every part to your model and serial number.
Keep your Evapco Cooling Tower running longer
- Check gearbox oil level and belt tension monthly.
- Winterize or protect the basin and piping before freezing weather.
- Clean and disinfect the basin and fill at least twice a year.
- Inspect nozzles and drift eliminators each season.
- Keep a written water management program to control bacteria.
Build a maintenance plan
Create a printable monthly, quarterly and yearly checklist for every appliance in your home.
Open the schedule generatorEvapco Cooling Tower repair in Donna, TX
Hot summers and sudden cold snaps in Texas put refrigerators, freezers and ice makers in Donna under heavy load.
We provide cooling tower repair throughout Donna, including ZIP code 78537, and in nearby Weslaco, Alamo and San Juan.
In coastal parts of Texas, salt air speeds up corrosion on coils, burners, fasteners and electrical connections, especially on equipment installed outdoors.
Cooling Tower brands we repair
Frequently Asked Questions
How much does Evapco cooling tower repair cost in Donna, TX?
Most Evapco cooling tower repairs fall roughly between $300 and $2,500, depending on the part and labor involved. That is a national ballpark estimate; you get an exact quote after diagnosis and before any work starts.
Can you repair my Evapco cooling tower the same day?
Often, yes. Call (844) 442-1999 early in the day and we will try to schedule a same-day visit. Same-day service depends on technician availability and whether the part is in stock.
Is the repair guaranteed?
Yes. Completed repairs are covered by a 90-day parts-and-labor warranty. If the same problem comes back in that time, we come back and fix it.
Which brands do you service?
We work on all major brands, including Baltimore Aircoil, Evapco and SPX.
Should I repair or replace my Evapco cooling tower?
A typical Evapco cooling tower lasts about 15 to 25 years. If yours is well within that range and the repair costs less than half the price of a new one, repair is usually the better value. Our technician will tell you honestly if replacement makes more sense.
Other air conditioning and cooling repairs
- Mini-Split/Ductless AC Repair
- Chiller Repair
- Evaporative Cooler/Swamp Cooler Repair
- Window AC Sleeve/Chassis Repair
- Air Conditioner Repair
- Portable/Window AC Unit Repair
More repair services
- Refrigerator Repair
- Washing Machine Repair
- Dryer Repair
- Dishwasher Repair
- Oven Repair
- Range Repair
- Microwave Repair
- Ice Maker Repair
- Whirlpool Double Oven Repair
- Miele Combi Oven Repair
- Toto Heated Toilet Seat Repair
- La Cornue Dual-Fuel Range Repair
- Hamilton Beach Countertop Deep Fryer Repair
- Server Products Milk Dispenser Repair
Get your cooling tower fixed in Donna
Upfront quote before work starts · Parts matched to your model · 90-day warranty